ESSENTIAL OILS

  • Tung Oil

Tung Oil

Price: Contact
  • Quantity :
Botanical name: Vernicia Montana
Part: Seed
Method: Press
Cas number: 8001-20-5
Supply Ability: 5,000 kgs per month
Package: 180 kgs/drum
Payment: L/C, T/T
 
Tung Oil Properties:
 
 Nội dung/ Item  Chỉ tiêu/ Specification  Kết quả/ Results
 Apprence  Transparent or slightly turbid
 yellow liquid with inherent
 tung oil odor
 Transparent or slightly turbid
 yellow liquid with inherent
 tung oil odor
 Color (gardner)  8.0 max  7.5
 Specific gravity (20°C)  0.930 - 0.945  0.9365
 Refractive index (20°C)  1.515-1.545  1.5190
 Iodine value(WIJS)  160-173  161
 Saponification value  190-195  193
 Moisture & Impurities  0.3% max  0.1
 Free fatty acid  6.0% max  1.5
 Worstall's heat test  Less 12 minutes  7
 Beta Tung oil test  No crystalline precipitate  Negative (no crystallization)
           
General Information:
Vernicia montana is a shrub or tree growing up to 15 metres tall.  The straight bole can be 25cm in diameter. The plant is evergreen in suitable climates, but can lose its leaves in areas with cold or dry seasons. The tree is often cultivated in tropical and subtropical areas for the valuable oil obtained from its seeds. The tree is sometimes planted as an ornamental and to provide shade.

Uses Notes:
The seeds contain 14 - 20% of a quick-drying oil, called  'abrasin oil'. This could easily mean that the seeds themselves contain 42 - 60% oil. Because of its similarity to 'tung oil' (from Vernicia fordii), the oils are often treated together as tung oil. The oil is used traditionally in the manufacture of paints and Chinese black ink; for waterproofing cloth and paper; caulking and painting ships; and as a lamp oil. It was also formerly used for insulating electric wires. Currently, its main use is in the production of paints and inks, while low-quality oil is processed into soap or linoleum. Teak oil which is sold for maintaining fine furniture is usually refined tung oil. 

Developments in environmental and health regulations have led to an increasing use of tung oil to line containers for food, beverages and medicines with an insulating coating. The main fatty acid of the oil is alpha-eleostearic acid . In eleostearic acid, the 3 double bonds are conjugated making them highly reactive. Under the influence of light or catalysts such as sulphur and iodine, alpha-eleostearic acid converts to beta-eleostearic acid, which is even more reactive and spontaneously polymerizes into a solid mass. The fatty acid composition of the oil is: α-eleostearic acid 75 - 80%, palmitic acid 4%, stearic acid about 1% and oleic acid 15%.

Traditionally, the fruits are collected when still green, placed in heaps and covered with straw or grass. The fruit pulp is allowed to rot until the seeds can be easily removed. The seeds are then crushed in a mill and roasted for a short time in shallow iron pans. The crushed mass is then thoroughly steamed and subsequently the fluid is pressed out of the cake yielding commercial wood oil. 
In modern processing, hulling of fruits is done by hand or mechanically. The seeds are then dried and shelled mechanically, after which the kernels are ground with some shell added to facilitate oil extraction. Cold-expression is done in screw presses yielding a clear, light-coloured oil.

The cake may subsequently be warm-pressed or solvent-extracted to increase the yield, but the product is of lower quality.
The press cake, after extraction of the oil, is a good fertilizer, but it is poisonous and cannot be used as animal feed.
The wood is white, soft and perishable. It is only suitable for simple construction, core-stock for plywood, paper pulp.
The wood is used for fuel.

 

video

Online Support

  • icon +84.903561868
  • Office +84.024.62 948 948
  • Consulting +84.024.62948948
  • Exports +84.903561868